Random Happenings in the Boat Yard

It’s time for random happenings in the boat yard!  Times where there isn’t quite enough on a single subject to fill a full post, but things which are important enough where I don’t want to leave you in the dark completely.  They also come in handy when I forget to take pictures of something that could have been a full post, something I’m sadly becoming very good at.  Kind of funny for a person who used to get scolded for never putting their camera down and just experiencing life instead.

So, here’s a few things that have happened over the past few weeks which you might enjoy a sneak peak at:

  • Work continues, slowly, in the head.

As I get back to my task of painting the cabin top outside, Matt has once more taken to the head.  Normally I wouldn’t trade places in there for anything (remember my sanding woes of a few months ago?), but Matt is the lucky one that gets to do some amazing things in there.  After having put together pieces of sap covered cherry hardwood and plywood to make the cover for our composting toilet and also our cabinet door, he has now made the counter the sink will sit on.

For this we used 1/4″ thick by 2.5″ wide pieces of cherry hardwood that also had sap marks on them, and glued them on top of a 1/2″ piece of marine plywood.  It’s actually come together so nicely that I’m sad 2/3rds of it will be covered by the sink.  When that was done he began trim on all the pieces he’s made in there, routing rounded edges to take the place of the sharp 90 degree angles.  Having received our new toilet seat and lid in the mail, he was also able to cut the hole in the cherry lid, and also the square that will allow us to open a portion of the cherry seat to empty the…contents…of our composting toilet.

(I now realize I should have been using manual focus on these shots since the auto focus wanted to concentrate on the wall instead of the inside) cherry counter top in head cherry cover for composting toilet cherry cover of composting toilet

  • I am already in love with our new maple counter tops.

Yes, this has been one of the projects that both of us have been the most excited to start for months now.  For much too long we’ve been staring and the beautiful, pristine, and unblemished boards of maple hardwood sitting in our storage unit.  This wood will also eventually become our floors, but since that is the absolute last project we are going to complete on this boat, doing the counters in the galley will give us a small taste of what it will look like.

There is a slight difference between the sink counter top and the floors though.  On the floors we will be gluing 1/4″ thick pieces of maple hardwood to 1/2″ plywood, but in the galley we skipped the plywood and decided to go with 3/4″ pieces of hardwood maple.  Come to think of it, the lid of the fridge and freezer are also 1/4″ maple glued onto the plywood lid we’d already made.  Either way, we know that these two spots will be much easier than the floors, and that is because they are square.

For the sink counter we measured the general area and took into account the hole for the sink.  Going just a little large on that area, we glued all those pieces together, and once they had a few days to sit and harden, Matt attached the sink and used a router bit to properly trim the wood around the sink.  The lid to the fridge and freezer gave us just a little more trouble since we glued the full length of both of them together with the maple, and later went back to cut the line between the fridge and freezer so each can be opened on their own.

The line for the freezer side was perfect, but we forgot to take into the consideration the width of the blade and it cut deeper than we would have liked into the foam lid of the fridge.  Nothing a few more days and epoxy filler plus a few more layers of sheet fiberglass couldn’t fix, but it would have been better if we didn’t have to go back and fix any mistakes at all.  Now we just need to add some trim and a fiddle and that area will be all set!

gluing together maple counter top

  • maple counter tops installed
  •  New friends came to see us in the boat yard!

After nearly a year of corresponding back and forth through emails and Facebook messages, we were finally able to meet up with fellow young cruisiers, Johannes and Cati.  The funny thing about our getting to know each other is that although Johannes had been following our blog for a few years, he didn’t reach out to say hi until we arrived in Indiantown and just started refitting Daze Off.  As it turned out, we had mutual friends in the Sailing Conductors, who knew Johannes from being interviewed by him in Germany for Yacht Magazine, and them being our new neighbors and best friends in the work yard.

Ok, so maybe location was more of a coincidence in timing of them contacting us when they did, as him and Cati were passing through Florida and were situated in Palm Beach for a few days, extremely close in cruisers terms. Unfortunately it didn’t work out at the time, and we even missed out on each other once more this winter when they flew through Florida again on their way to the Bahamas, but the third time was the charm.

With their boat in Miami for a few days and a rental car at their disposal, they made the drive all the way up to Indiantown just to see us for dinner!  Showing up with a variety of German beers for us and cat treats for Georgie, it was nice to finally meet face to face after having become friends online. We quickly took over a table on the patio after giving them the grand tour of our boat, although we knew it wouldn’t be a late night (this time) because they still had to drive back to Miami.

We never had a lack of things to talk about as we compared boat projects, passages, and generally all got to know each other better. Some of our discussion was even able to revolve around the Vineyard Vines photo shoot we had all just participated in. When the producer had come to me in need of a solo sailor I was able to recommend Johannes as once upon a time he crossed the Atlantic alone in his old boat.  He’s since moved up to a bigger one as well as a beautiful companion, and we were able to laugh and swap stories of how each other’s shoot went…including the run in of his boat with the chase boat while sailing/shooting out on the Atlantic!

This was another occasion where I only brought my camera out for a total of about three photos, otherwise I probably could have written an entire post on our fun night.  The good news is that they’ll be passing through here soon enough on their boat as they cross through the Okechobee Waterway before getting back to the Atlantic and setting off for Germany in May.

Cati, Johannes, Jessica & Matt

German beers

  • My computer is trying to silence me.

For the past few months I’ve been having issues with my computer that I’ve been ignoring too long.  Mostly it consists of my screen shaking on me, and sometimes momentarily freezing.  Whatever is doing it, it has now gotten so bad that I literally can’t get on my computer do any kind of work (or even pleasure surfing) for fear of seizures or at least a terrible headache.

If you’ve noticed…it’s been about a week since I’ve gotten my last post up.  If you’ve sent me an email in the past 2 months, there’s a 40% chance I’ve not replied yet.  Getting on my computer to do anything has been a complete frustration lately and I’ve basically been ignoring it except when absolutely necessary.  I should say, some days are better than others, and although I should be spending my time looking in on how to fix this problem instead of sticking my head in the sand about it…I take whatever moments of visual stability I can get on it to do all the work that one would need to do on their computer.

We do have a few other devices I could use…but my computer is the only one with the photo editing abilities I like, and also the only device we own with an actual keyboard.  I may be old fashioned, but I don’t like to type posts or write emails with a touch screen.  I spend more time fixing mistakes than getting any actual work done.

There is good news though!  I posted a short video of my problem on our Facebook page, and a number of you poured in with recommendations of what might fix it.  Although I’ve tried just about every personal way to fix it that I can, it sounds like it may have to go in for service due to a lose wire or connection.  Or…I may just end up having to get a new one altogether.  Which may not be the worst case, because I don’t want to leave the country this fall with a computer that I’ve been limping around on.  I can already tell you from personal experience that buying new electronics in the Caribbean is not usually an easy (or cheap) task.  So this may have been the push I needed to get it done.

Since both Matt and I are so stubborn about letting go of money where we don’t need to though…I’ll probably keep limping along until we make t to Arizona to visit my parents in a few weeks.  At least there we’ll not only have a lot of free time on our hands to visit techie stores or service desks, but we won’t have to drive 30 miles each shot to do it.  So until then…just be patient on the lack of posts and updates on my end….I should be back to a more regular schedule soon.

shaking computer screen

You Might Also Like: